CAME XVP S Configuration Manual page 4

❶
Model: XVP
❷
Serial number: 0097c002
❸
HW version: 1.0
❹
SW version: 0.1.0RC3
❺
IP address: 192.168.61.34
❻
Device mode: Slave
Enter the credentials
admin
❼ ❽
❾
Login
❿
Clean screen
Enter the credentials
admin
⓫
⓬
Login
A page with some system information is displayed.
❶ Device model.
❷ This is the unique device ID. Use for PCS/XIP tool programming.
❸ Device hardware version.
❹ Software installed on the device.
❺ Device network address (where applicable)
If there is no IP address, the configuration is in DHCP mode and the device has not obtained a valid
address from the network.
❻ Master or Slave operating mode
❼ To access all system settings, select ADMIN.
❽ To access a limited part of the system settings, select USER.
❾ Enter the password.
❿ Lock screen sensitivity for 20 seconds for cleaning. Log in not required.
⓫ Enter the password for the chosen account.
Default installer password (ADMIN): 112233
Default user password (USER): 123456
⓬ Tap [LOGIN] to open the SETTINGS menu.