CAME XVP S Configuration Manual page 8

Multimedia configuration
❸
MULTIMEDIA
Audio coding
Video coding
Main
❶
Video
Bit rate
CAMEConnect
❷
Video
Bit rate
The BIT RATE and RESOLUTION of the CAMECONNECT profile must be chosen according to the available UPLINK band.
❼
CAME CONNECT
❶
Keycode
❷
Enable connection
❸
Provider
❹
State
Check connection
Save
This window is used to configure the maximum BIT RATE and the video STREAM resolution that the device
can process, choosing from the available values.
The greater the BIT RATE and RESOLUTION values, the better the video quality, but also the more
UPLINK data bandwidth is occupied.
❶ Communicate with local system devices. This profile is also used as the MAIN profile for the RTSP video
stream.
❷ Communicate with remote devices connected to CAMEConnect. This profile is also used as a LOW profile
for the RTSP video stream.
❸ Go back to the previous page.
Configuring CAME Connect (MASTER device only)
❶ Device keycode.
❷ Enable video-entry call VoIP remote control.
Connection to CAME Connect is disabled by default.
The CAME Connect connection must be active to receive calls over the app.
❸ URL for the remote calling service (default: xip01.cameconnect.net)
❹ Connection status.
❺ Press this to run a connectivity check. See next image.
❻ Save the configuration.
❼ Go back to the previous page.
❺
❻