Maintenance - CAME XTS 7IP WH WIFI User Manual

Number of frames:
Empty
Empty
19:02
3

Maintenance

19:02
The factory settings require the indoor receiver to be in "slave" mode. Any indoor receivers set to "mas-
ter" mode are configured via the PCS/Xip software to match their systems structure.
C Touch the button to set the indoor receiver to "slave" mode.
This setting is only available on the "master" indoor receivers. The changed mode requires the device to
be reconfigured.
D Touch the button to return all the local settings to the default factory settings.
All manuals and user guides at all-guides.com
Empty
Settings
Save
Thursday
01 Feb 2018
Info
A
Reboot device
B
Restart application
C
Set slave mode
D
Restore preset settings
Thursday
01 Feb 2018
Info
Touch each of the empty sections
and use the drop-down menu to
select the content that you want to
assign to the section.
Save the setting by touching the
Save button.
Back Home
(administrator password required;
the default password is 112233).
A Touch the button to reboot the
indoor receiver.
B Touch the button to reboot only
the application that runs the indoor
receiver.
Back Home