CAME XVP S Configuration Manual page 19

SCREEN
AUDIO
System
Date and Time
Network
SIP
Credentials
Access control
Device
Device
Images and logos
Maintenance
Diagnostics
SENSORS
AUDIO
System
Date and Time
Network
SIP
Credentials
Access control
Device
Device
Images and logos
Maintenance
Diagnostics
RTSP
System AUDIO
Date and Time
❶ MAIN
Network
SIP
❷
Credentials
Access control ❸
Device
Device
❹
Images and logos
Maintenance
❺
Diagnostics
Device
SCREEN SENSORS MULTIMEDIA
AUTOMATIC BRIGHTNESS
SCREEN ACTIVE
SCREEN IN STANDBY
Device
SCREEN SENSORS MULTIMEDIA
PROXIMITY
SCREEN ACTIVATION
LIGHTING
PULSATION IN STANDBY
Device
SCREEN SENSORS MULTIMEDIA
SECONDARY
ANONYMOUS
Disenabled
NEW PASSWORD
CONFIRM NEW PASSWORD
❶ Adjust the screen brightness according to the lighting conditions.
Help Exit
❷ Adjust the screen brightness during use, if automatic brightness is not
RTSP
activated.
❸ Adjust the screensaver brightness when the screen is in standby mode.
❶
❷
❸
❶ Adjust the sensitivity of the proximity sensor: low (short distances), medium
Help Exit or high (maximum distance).
❷ Enable or disable screen activation in proximity to the device.
RTSP
If the function is not enabled, the screen can only be activated by touch.
The proximity sensor distances may vary slightly depending on the person
❶
and the direct lighting conditions of the device.
❸ Set the intensity of the LED crown on the video camera during a call.
❹ Activate the pulsating effect of the LED crown on the video camera when the
device is in standby mode.
❷
❸
❹
The RTSP protocol enables the video stream from the entry panel to be displayed
Help Exit
on an RTSP client.
RTSP
❶ This is the URL to use in the RTPS client to view the MAIN video stream
from the XVP device. The BIT RATE and resolution parameters for this video
stream are those from the MULTIMEDIA section of the MAIN profile. The default
USERNAME is "ipcamera". Under the parameter [password], enter the password
set.
❷ This is the URL to use in the RTPS client to view the SECONDARY video
stream from the XVP device. The BIT RATE and resolution parameters for this
video stream are those from the MULTIMEDIA section of the SECONDARY profile.
The default USERNAME is "ipcamera". Under the parameter [password], enter
the password set.
❸ If enabled, this allows anonymous access to the video stream from the RTSP
clients, i.e. using the URLs indicated above without the username and password.
❹ and ❺ To change the password for the RTSP stream, enter the new password
in these fields. The default password is "ipcamera".