GENERAL PRECAUTIONS Read the instructions carefully before beginning the installation and carry out the actions as specified by the • manufacturer. The installation, programming, commissioning and maintenance of the product must only be carried out by • qualified technicians, properly trained in compliance with the regulations in force, including health and safety measures and the disposal of packaging.
The device automatically recognises the local or PoE power supply. F Reset button. When pressed it reboots the device; this operation DOES NOT require any deleting of program- ming. Function of terminals Local power supply input Landing call input Alarm input Technical data Type XTS 7IP WIFI...
Page 5
To make the device's installation more solid, use the supplied screws and dowels to fasten the frame to the wall. Notes on installing indoor receivers connected to the WiFi network Install the indoor receiver: away from any metal objects that may interfere with the signal, or from any devices that generate magnetic fields.
Examples of installation The devices' Master/Slave setting is programmed via the PCS/XIP software. Single-household system with PoE power-supply Switch PoE Master Modem router Wi-Fi Slave MTMV/IP Single-household system with local power-supply and WiFi-connected indoor receiver VAS/101 Master Modem router Wi-Fi Slave MTMV/IP VAS/101...
Page 8
Master indoor receiver in one apartment, whether they are connected to the LAN line or reachable via the WiFi network or the mobile phone network via the CAME Connect service. When there's an incoming call, all the devices programmed to answer will ring.
Page 9
Master indoor receiver in one apartment, whether they are connected to the LAN line or reachable via the WiFi network or the mobile phone network via the CAME Connect service. When there is an incoming call, all the devices programmed to answer will ring.
Page 10
An incoming call from the entry panel can have up to 10 devices ring; whether they are connected to the LAN line or reachable over the WiFi network or the mobile network via CAME Connect. When there's an incoming call, all the devices programmed to answer will ring.
This section requires specific know-how in operating the vid- Network Network eo-intercom system. Wrong set- tings may cause partial or even CAME Connect SIP Settings total malfunctions; that is why Credentials Automatic door opener the editing of some parameters Automatic door opener...
Network This section is for establishing in which way the device connects to Ethernet Enabled Disabled the network. A Enable/disable the types of Configure Ethernet wanted connections Wireless Enabled Disabled B Select whether the gateway Configure WiFi connection happens via the Ether- net or WiFi network.
Configuring the Wireless connection H This button is for enabling the WiFi network. Type of connection WiFi This icon indicates that the Wi- Configure WiFi Fi connection mode is active. Mode DHCP Static IP address Netmask Gateway Save 19:02 Thursday 01 Feb 2018 Info Back...
Page 14
CAME Connect - only on the master indoor receiver A Device's univocal code. B For enabling or disabling the VoIP remote control of the video-in- Keycode tercom call. Enable connection The factory settings require that the CAME Connect connection is Internet service provider disabled.
Page 15
Info Back Home D In this space enter the server's IP address. Example of CAME server IP addresses: ETI/MiniSER Xip, ETI/DOMO Xip - 192.168.0.3 (port 0) - 192.168.1.3 (port 1) ETI/SER Xip, 192.168.1.1 Serverless IP entry panel, 192.168.1.5 E Select the type of server to which the device is connected.
Automatic door opener This function, which is especially useful for businesses, lets you automatically open the entrance once the call-but- ton is pressed on the entry panel. The activation of this function can be programmed to schedule time slots and days of the week.
For editing the selected ele- ment. 08:30 - 12:30 Mon Tue Wed Thu Fri For eliminating the selected 13:30 - 18:30 Mon Tue Wed Thu Fri element. Touch the button Back to return to New time-slot the list of configurable parameters. Delete all 19:02 Thursday...
Touch each of the empty sections and use the drop-down menu to Number of frames: select the content that you want to assign to the section. Empty Empty Save the setting by touching the Save button. Empty Settings Save 19:02 Thursday 01 Feb 2018 Info...
Page 19
SETTINGS ONLY AVAILABLE ON WEBPAGE The webpages, besides allowing you to set most of the parameters that may be set up on the indoor receiver's interface, also allow you to run certain additional functions shown in this section. In the Chrome, Firefox, Safari browsers' address bar, type the de- XTS 7 IP vices address..
Page 20
Node state Help Exit On master indoor receivers, this System CHARACTERISTICS NODE STATE window is for viewing the state of the connection on SIP nodes. Date and Time B Select the type of SIP nodes of NODE TYPE Network which you want to view the state. Red dot = Node not connected or connecting.
Change password Maintenance Help Exit In this window you can change the System password used for accessing. UPDATE... CHANGE PASSW... CONFIGUR... Date and Time PASSWORD Network NEW PASSWORD IP video cameras Voicemail CONFIRM NEW PASSWORD Maintenance Diagnostics Save Cancel Diagnostics Diagnostics Help Exit...
Page 24
Pertinent Regulations.CAME SpA, the manufacturer, declares that the products described in this manual conform to Directive 2014/53/EU. The complete wording of the EU declaration of conformity is available at the following Internet address: www.came.com Decommissioning and disposal. Dispose of the packaging and the device at the end of its life cycle responsibly, in compliance with the laws in force in the country where the product is used.