Reboot Device; Restore Factory Defaults - CAME Wi-Fi PLX V Operating And Installation Manual

Maintenance

Reboot device

Restore factory defaults

Demo mode: OFF
Device information
Model: PLX V WI-FI
HW version: 0.0 SW version: 0.0.0xx0-seq
s/n: 0x000000 KC: 000X00X000X000XX
Wi-Fi SSID:
MAC address: 00:00:00:00:0X:00:XX
IP address: 000.000.00.00
GW: 000.000.00.0
Device status: OK
CAMEConnect status: Connected
Page 25 - Manual - FA01792-EN - 10/2022 © CAME S.p.A. - The contents of this manual may be changed at any time and without notice. - Translation of the original instructions
Back
DNS: 0.0.0.0.
Back
1
Reboot device
Select to restart the device.
2
Restore factory defaults
Select to restore all local settings to the default factory settings.
3
DEMO mode
Select to activate or deactivate DEMO mode.
Demo mode is designed for demonstration systems. If Demo mode is activated, you
are disconnected from the confi gured Wi-Fi network.
From here you can view the following device information.
Model
Hardware version and software version
Serial number and keycode
Wi-Fi SSID
MAC address
IP address
Gateway and DNS
Device status
CAMEConnect connection status