FujiFilm FCR XC-1 Operation Manual page 98

[ Test 1 ]
1 0900 SENSITIVITY
1 0901 SHARPNESS
1 0902 LINEARITY
1 0903 IMAGE-FORMAT
1 0904 CONTRAST
1 0905 MAX 0.5
1 0906 MAX 1.0
1 0907 MAX 2.0
1 0908 MAX 3.0
1 0909 MAX 4.0
1 090A AVE 0.5
1 090B AVE 1.0
1 090C AVE 2.0
1 090D AVE 3.0
1 090E AVE 4.0
1 0910 SENSITIVITY HQ
1 091B SHAD. /RELATIVE SENS.
1 091B 1 SHOT PHANTOM
1 091B ERASURE (PRE-EXPOSURE)
1 091E ERASURE (REFRESHED IP)
1 091E DARK NOISE TEST
1 5900 AVE5CT08
1 5901 AVE5RT08
1 5902 AVE5RM08
1 5903 AVE5RB08
Y -24
I
Menu
(PA) : Right-to-left
reversed output
Sensitivity for HQ image (50� reading)
A test menu that subjects an IP to uniform exposure to check
shading uniformity and S values. SEMI AUTO mode applied
at L=1.
A test menu that exposes a phantom for checking several
performance items.
A test menu that subjects an IP to a large exposure dose of
approximately 100mR to 200mR.
A test menu that handles an IP that has been subjected to
Erasure2 (Refreshed IP).
A test menu that checks occurrence of an error after
Erasure2 (Refreshed IP) is conducted.
This is to output images in 0.8 (GT:A) of density for Semi III
(CT).
This is to output images in 0.8 (GT:A) of density for Semi III
(RT).
This is to output images in 0.8 (GT:A) of density for Semi III
(RM).
This is to output images in 0.8 (GT:A) of density for Semi III
(RB).
Applicable projection method and
observation site
Remarks
Auto V (Dmin = 1.0) using the Type II S
the Auto Mode.
Auto V (Dmin = 0.4) using the Type II S
the Auto Mode.
Auto V (Dmin = 0.2) using the Type II S
the Auto Mode.
Auto V (Dmin = 0.0) using the Type II S
the Auto Mode.
First Edtion 11.2005 897N0565
FCR XC-1 Operation Manual
in
2
in
2
in
2
in
2