FujiFilm FCR XC-1 Operation Manual page 47

Error code
11530 Resend image
11531 Image send failure
11700 Dead erase lamp
11701 Erase incomplete
11702 Replace erase lamp
Life end. Long
11703
erasure
Life end. Poor
11704
erasure
Erase-lamp temp.
11710
sensor fail
11720 Failed cooling fan
11760 IP erase incomplete
11901 Worn air filter
11902 Worn brush roller
11903 Worn damper
Worn erasure lamp &
11904
filter
11905 Worn pump
Maintenance data
11907
saving failure
First Edtion 11.2005 897N0565
FCR XC-1 Operation Manual
Message title
Since image could not be
transmitted, a resend is
attempted.
Image could not be sent.
Since some erasing lamp(s) is
dead, image erasure time is
extended. The erasing lamps
need inspection as soon as
possible.
Since erasing lamps are dead,
image erasure is not possible.
Erasing lamps need replacing.
Erasing lamps need replacing.
Due to the end-of-life of erasing
lamps, the image erasure time is
extended. Lamp changing should
be done as soon as possible.
Because of the end-of-life of
erasing lamps, image cannot be
erased. The erasing lamps need
replacing.
Since temperature sensor is
faulty, image cannot be erased.
The temperature sensor needs
replacing.
Since cooling fan for erasing
lamps is faulty, image cannot be
erased. The cooling fan needs
replacing.
Image on IP is not completely
erased.
Air filter is worn and needs
replacing as soon as possible.
Brush roller is worn and needs
replacing as soon as possible.
Damper is worn and needs
replacing as soon as possible.
Lamp filter is worn and needs
replacing as soon as possible.
Pump is worn and needs
replacing as soon as possible.
Information for maintenance
checkup purposes cannot be
collected.
Description
Check the conditions of the
console, connections cables, and
hub.
Press "Eject" and remove the
cassette.
Contact your local authorized
distributor.
Contact your local authorized
distributor.
Contact your local authorized
distributor.
Contact your local authorized
distributor.
Contact your local authorized
distributor.
Contact your local authorized
distributor.
Contact your local authorized
distributor.
Press "Eject." Remove the
cassette once, insert it again, and
then erase the image.
Contact your local authorized
distributor.
Contact your local authorized
distributor.
Contact your local authorized
distributor.
Contact your local authorized
distributor.
Contact your local authorized
distributor.
Start up the console that is
connected to the FCR XC-1.
Corrective action
5
5-7