5.3 If the FCR XC-1 Cannot be Powered OFF
If the FCR XC-1 cannot be powered off even when you have performed normal shutdown procedures,
please make the following checks:
Isn't there any yet-to-
be-transmitted image
still remaining in the
FCR XC-1?
More than five minutes
have passed since the
[Shutdown] button had
been pressed.
5
5-4
Shut down the FCR XC-1 after transmitting
any remaining image.
Turn OFF (press to the "O" side) the Main
Power Switch at the bottom right-side corner
on the front of the equipment.
Press.
Main power switch
First Edtion 11.2005 897N0565
FCR XC-1 Operation Manual