Table of Contents
Advertisement
V-FLAP INSTALLATION
OPTIONS FOR VENTILATION
This hood can be set up for either external venting or recirculation of the air. The
type of setup should be decided before commencing installation.
EXTERNAL VENTING
A flexible pipe is provided which allows the cooking odours to be extracted outside.
If this is the chosen installation method consideration to the route of the vent pipe
should be made. The unit is also provided with an adaptor allowing pre-existing
120mm ducting to be used to vent the unit.
RECIRCULATION
This Cooker hood also supports the recirculation of the air once it has passed
through the filters. The filtered air is then expelled through the vent holes in the side
of the chimney.
When setting the unit up in this configuration, carbon filters should also be used to
remove odours from the air. Details of sourcing and fitting the filters can be found in
the Carbon filter section.
6
Advertisement
Table of Contents
