REMOTE CONTROL
15 seconds after the cooker hood is connected to the power supply, press and hold
for 5 seconds, the indicator lights will begin flashing. The cooker hood is in
connection mode.
Press any button on remote control to confirm the connection. The connection process
finished and the remote control can be used for speed selection, lighting and timer
setting.
Increase wind speed
Timer function
Lamp function
Decrease wind speed
NOTE: If you want to connect again, you will need to clear the code that has been set
up previously.
To clear the code, press and hold
for 5 seconds the indicator lights will begin
flashing. The cooker is in connection mode. Then, press
again for 5 seconds, the
previous connection code is cleared.
11