Table of Contents
Advertisement
6. open the decorative plate in order, and take
out the filter.
9. Install the panel decorative strip and filter. Install the expansion pipe to the outlet
(refer to pic 9). If you want to use the converter, you need to fix the converter on
the outlet and then fix the expansion pipe.
5.
Decide on the direction of the air
outlet. ①/②/③/④
7.
Refer to Pic 7, unscrew and take away
the 4 pcs ST4*8mm screws that on the
panel decorative strip.
8.
Unscrew the 8pcs machine silk from
the bottom of the cabinet housing and
rotate it by 90°/180°/270° to choose the
direction of the outlet, then screw the 8
pcs machine silk to fix the housing well.
8
Advertisement
Table of Contents
