Table of Contents
Advertisement
6.3 Connecting an external
audio source
When connecting an external audio source (studio
music), pay attention to the correct polarity.
Wiring on the audio equipment's side
6.4 Level adjustment studio
music signal
The voice / audio system components are built in
the middle of the bed part (vacuum housing) of the
tanning device. The potentiometer which serves of
the external audio signal is located on the left side
of the housing. To avoid overdrive, select the level
adjustment accordingly. The level setting depends
on the strength of the external signal and should
be carried out by qualified, trained and authorized
service technicians. Adjustment of the sound level
can only be conducted in the service menu.
42
A s s e m b l y I n s t r u c t i o n s | 6700
R-
R+ L-
L+
α
α
/6800
/7000
6.5 Operation using different
audio sources
The audio source can be chosen in advance via the
"preSelection" feature and then changed at any time
by using the interior control panel.
The tanning device can be operated using the
following audio sources:
INTERNAL MP3 PLAYER
When using the internal MP3 player, you can either
play the music tracks that are originally supplied on
the SD card, or you can record your own tracks to
the SD card.
EXTERNAL AUDIO SOURCES
LINE-IN
As an external audio source, you can connect
devices ranging from the standard-line level to low
loudspeaker levels.
These sources comprise:
• Studio music
• External players such as MP3 players, mobile
phones (cell phones), I-pods, etc.
USB
You can connect a USB stick to a USB port that is
integrated in the canopy.
EXTERNAL 100 V AUDIO SIGNAL (OPTIONAL
FEATURE)
If you decide for a connection to a 100 V audio
system, you will need a transformer (KBL no.: 9100
0170 00) for the transmission of the audio signal.
This connection must be made by qualified, trained
and authorized service technicians.
α/
α
7900
Advertisement
Table of Contents
