Install Bottom Components - KBL 6700a Assembly Instructions & Menu Settings

5.4.9 PUT ON LOOSELY - FRONT PLASTIC
CLADDING
Similar to disassembling step (4.8.2).
Remove all protective film!
5.4.10 ESTABLISH CONNECTIONS D1/D2
Similar to disassembling step (4.8.2).
5.4.11 INSTALL EXTERNAL CONTROL PANEL
Similar to disassembling step (4.8.1).
5.4.12 FASTEN FRONT PLASTIC CLADDING
Similar to disassembling step (4.8.2).

5.5 Install bottom components

PH2
5.5.1 INSTALL AND ALIGN AIR CONDITIONER
Similar to disassembling step (4.6.4).
The air conditioning unit should have
a slight forward tilt and suitable shims
placed under it if required.
5.5.2 FASTEN ELECTRONIC BOX
Similar to disassembling step (4.6.1).
5.5.3 INSTALL ELECTRONIC BOX
Similar to disassembling step (4.6.3).
5.5.4 INSTALL AQUACOOL UNIT
Similar to disassembling step (4.6.2).
5.5.5 INSTALL THE AROMA DOSE TIN
• Take out aroma tin ㉒ from the accessory box
and install in the aquaCool unit.
- Release retaining clip.
- Insert aroma tin.
- Lock retaining clip.
• Put the aquaCool canister
ister ⑭ into their place and connect.
• Fasten cable harness D10/D11 -> (4.6.2).
⑭
A s s e m b l y I n s t r u c t i o n s | 6700
㉒
I
and condensate can-
I
α α α/
/6800 /7000 7900
J
α
35