5.11 Attach hinge caps
10
5.11.1 CLOSE THE BED
5.11.2 OPEN THE SIDE PANE
5.11.3 FASTEN HINGE CAPS
• Unpack both hinge caps (left/right)
• Push the hinge caps
Ⓑ (M6 - SW10).
10
Ⓑ
5.11.4 CLOSE SIDE PANE
5.12 Attach shoulder tanner /
right shoulder piece
PH2
5.12.1 OPEN THE BED
Attention
The bed and the bed pane can be dam-
aged when it is opened incorrectly.
• Open the tanning device only with the
bed pane in position (closed)!
38
A s s e m b l y I n s t r u c t i o n s | 6700
G
from the box.
G
onto the guides and fasten
G
α
α
/6800
/7000
5.12.2 FASTEN SHOULDER TANNER /
SHOULDER PIECE
Shoulder tanners
• Carefully insert into the gap between bed and rear
wall.
Attention
Do not tilt! Component can be damaged.
• Insert the two front metal tabs and align them
so that the retaining bolt (M6x12 - PH2) can be
screwed in.
PH2
• Also connect plug X24 Ⓒ to shoulder tanner.
α/
α
7900
B
or shoulder piece:
B
Ⓒ