KBL 6700a Assembly Instructions & Menu Settings page 26

• Have two people to lift the cladding out of the rear
guide slot.
• Then lift it off the two bolts of the knurled-head
screws (only 7900
• Lift the cladding out towards the front, transport
it to the installation site and set it down safely on
protective padding.
3.8.5 DISCONNECT CONNECTIONS
• Loosen both Airflex hoses on the canopy side.
26
A s s e m b l y I n s t r u c t i o n s | 6700
α
).
7
α α
/6800 /7000
• Loosen the four knurled-head screws and fold the
sealing rubber onto the rear wall.
• Disconnect plug connectors between the canopy
and the rear wall:
- Plug XD11–XD17 (allocation is model-depen-
dent).
- Patch cable to the control panel.
- USB cable.
- Hose, aquaCool air.
- Hose, aquaCool.
• Follow the connection diagram on the
α/ α
7900
canopy during installation!