Remove The Feet; Remove Rear Wall - KBL 6700a Assembly Instructions & Menu Settings

4.9 Remove the feet

PH2
4.9.1 REMOVE LEFT FOOT OF THE DEVICE
• Loosen inside screws 4 x (PH2)
• Loosen outside screws 2 x M8
PH2
• Disconnect plug connector X15 to "foot fan".
Attention
Do not damage the fan cable.
• Do not pull the foot of the tanning
device too far to the front!
13
13
X15
4.9.2 REMOVE RIGHT FOOT OF THE DEVICE
• Loosen wiring harness.
• Loosen inside screws 6 x (PH2)
• Loosen outside screws 2 x M8.
PH2
4.9.3 TRANSPORT THE UNIT FOOT TO THE
INSTALLATION SITE.

4.10 Remove rear wall

PH2
4.10.1 TIGHTEN LOOSE CONNECTIONS
• Tighten all loose cables and wires, as shown in the
images.
A s s e m b l y I n s t r u c t i o n s | 6700
13
α α α/ α
/6800 /7000 7900
29