4.8.3 RELEASE TENSION ON THE CANOPY
Components are under spring tension
Risk of injury by the canopy dropping
down when releasing the tension of the
canopy lifting mechanism.
• The canopy must be held by a second
person to prevent it from dropping down.
• Support the canopy in the center (second person).
• Release tension of the canopy lifting mechanism.
19
PH2
• Turn the adjusting nuts on both sides one after
another up to the beginning of the threaded bar.
CAUTION
• Take both steel ropes of the canopy lifting mecha-
nism off the guide pulleys.
•
• Unhook the spring.
• Lower canopy.
4.8.4 REMOVE REAR PLASTIC CLADDING
The rear plastic cladding is loosely fitted
in all 7900
6700-6800
cladding have 3 additional black screw
rivets to loosen.
In 6700-6800
plastic cladding, this is replaced with
a sheet metal plate which cannot be
removed.
A s s e m b l y I n s t r u c t i o n s | 6700
α
tanning devices.
α
devices with rear plastic
PH2
α
devices without rear
α
α
α/
/6800
/7000
α
25
7900