Attach Left Shoulder Piece; Fine Adjustment Of The Bed Lock; Install Side Plates - KBL 6700a Assembly Instructions & Menu Settings

• Connect the audio cables.

5.13 Attach left shoulder piece

PH2
• The left shoulder piece is installed similar to the
right shoulder piece.
5.14 Fine adjustment of the
bed lock
5
Attention
The bed and the bed pane can be dam-
aged when it is opened incorrectly.
• Open the tanning device only with the
bed pane in position (closed)!
Adjust the bed lock so that
• the bed closes and stops with gentle pressure.
• the bed moves freely the entire distance and does
not touch other components.
The bed dampers must be centered in
the openings.
Adjustment options:
• Right/left offset – to be done via the front plate.
Grab hold of the top of the plate and using physical
strength carefully jerk it in the required direction to
move it sideways.
• Height offset – can be adjusted by adjusting screws
on the side (ISK spanner SW 5).
5

5.15 Install side plates

PH2
On both sides (left/right):
• Pull of protective film.
A s s e m b l y I n s t r u c t i o n s | 6700
α α α/ α
/6800 /7000 7900
39