Disassembly; Tools And Aids; Unpack Tanning Device And Accessories - KBL 6700a Assembly Instructions & Menu Settings

4. Disassembly

4.1 Tools and aids

Cutter knife
ISK screw driver (SW 4 / 60 mm)
4
Item no: 3410055251 (Accessories)
Standard Phillips screwdriver (PH2)
Screwdriver 3mm
3
Cordless screwdriver with PH2
& M6 ISK screwdriver bit
Hose clamps SW7 socket spanner
7
Side cutter
SW 19 pipe wrench
19
Item no.: 3410103500 (Accessories)
Spacer and protective padding e.g. timber
beams, foam strips and blankets.
Spirit level
10
SW 10 spanner
Reversible ratchet handle 1/4"
13
with AF socket SW13
2 (optimal 4) furniture trolleys
Tape rule or folding rule
Phillips screwdriver (PH2) 90° offset
PH2
Number of required persons
10
A s s e m b l y I n s t r u c t i o n s | 6700
6 PH2
α α α/ α
/6800 /7000 7900
The disassembly and assembly steps of the tanning
device are described in the chapters that follow.
The tools and hardware required to correctly and
safely perform these steps are shown at the begin-
ning of each chapter.
If cable ties have to be removed during
disassembly, it is indicated by this sign
at the beginning of the chapter.
Cable ties which have been removed
during disassembly have to be replaced
during assembly.
4.2 Unpack tanning device and
accessories
4.2.1. UNPACK TANNING DEVICE
Remove plastic film and cardboard. Transport the
attachment parts to the installation site.
A
B
C
left
hand
side
A
Exhaust air vent
B
Assembly Module - shoulder tanner (right)
C
AM - shoulder (left)
D
AM - canopy end caps (left/right)
E
Foot cladding (left/right)
F
AM - foot (left/right)
G
AM - hinge cap (left/right)
F
D
G
F
right
E
hand
side