Display Turning Function - Panasonic LS-400 Series Operation Manual

6-3. Display Turning Function

This function can be used to invert the display orientation, according to the direction of amplifier installation.
Turn OFF
Select the desired display orientation
by turning the Jog switch.
The digital display will quickly
blink to confirm the setting.
When turn ON
Press the
MODE key 5 times.
Turn the Jog switch twice
toward the ' ' direction.
Press the
Jog switch.
Turn the Jog switch once
toward the ' ' direction.
Press the
Jog switch.
Turn ON
Press the
Jog switch.
Press the
MODE key once.
Press the
MODE key once.
33
1Press the [MODE key] 5 times to select 'PRO mode'.
2Turn the [Jog switch] twice toward the '
select 'PRO2 mode'.
3Press the [Jog switch] to enter the 'display switching' state.
4Turn the [Jog switch] once toward the '
the 'display turning setting' state.
5If the [Jog switch] is pressed, the current 'display orientation'
(red) will be displayed.
* The factory setting is Turn OFF.
6If the [Jog switch] is turned, display orientation (red) will blink
on the digital display.
Select the desired 'display orientation'.
7If the [Jog switch] is pressed, display orientation (red) will
quickly blink on the digital display, and the selected 'display
orientation' will be confirmed.
The digital display will not blink (red) if the setting has not
been changed.
8If the [MODE key] is pressed once, the amplifier will return to
'PRO2 mode'.
9Press the [MODE key] once, the amplifier will return to 'RUN
mode' (normal sensing operation).
To return the display to the original state, select the setting
'Turn OFF'.
Ramco National
(800) 280-6933
www.panasonicsensors.com
' direction, to
' direction, to enter