Panasonic LS-400 Series Operation Manual page 22

The status condition (C) when incident light
is the greatest intensity.
OFF or ON level 1_SL
Upper and lower limits have
not been correctly set.
ON or OFF level 2_SL
The symbol ' ' will be
displayed repeatedly.
Press the
MODE key 5 times.
6The amplifier has entered the 'P-3' setting state and '
(green) will blink.
Press the
7If the [Jog switch] is pressed while in the status condition (C)
Jog switch.
when the incident light is the greatest intensity, then the
display will blink and indicate the incident light intensity
Incident light
reading (red).
intensity for P-3.
8The display will indicate whether the ON and OFF level have
been correctly set and the setting for 'OFF or ON level 1_SL'
(green) will be displayed.
• If '
• If '
9Then the setting for 'ON or OFF level 2_SL' (green) will be
displayed.
0By pressing the [MODE key] 5 times, the amplifier will return
to 'RUN mode' (normal sensing operation).
'OFF or ON level 1_SL' (green) and incident light intensity
(red) will be displayed.
21
' (red) is blinking...the ON and OFF level have
been set correctly.
' (red) is blinking...the ON and OFF level have not
been set correctly.
Ramco National
(800) 280-6933
www.panasonicsensors.com
'