VAT 642 GP Series Installation, Operating, & Maintenance Instructions page 98

1. Disconnect all electrical connections
at controller.
2. Write down the «NODE ADDRESS»
and «DATA RATE» in case of
Interface board replacement.
3. Remove the panel screws.
4. Remove this screws and the cover.
5. Remove female screw locks from
connectors.
98/113
MAINTENANCE
Description
Attention to ESD protection!
Edition 2017-11-24
Series 642
Required tool
Pozidriv screw driver size1
Open end wrench 7 mm
Ballpoint
Pozidriv screw driver size1
Screw driver size 2
Open end wrench 4.5 mm
605593EC