VAT 642 GP Series Installation, Operating, & Maintenance Instructions page 91

Series 642
9. Pull out the gate until the crank bolt
can be reached
10. Loosen and remove the crank bolt
screw
11. Remove the crank bolt from lever
12. Pull out the gate assembly complete
Caution!
Take care that gate is not scratching at
lever while pulling out
13. Place the gate on a clean place
14. Remove the gate o-ring
605593EC
MAINTENANCE
Description
Edition 2017-11-24
Required tool
Allen wrench 4 mm
O-ring removal tool
91/113