VAT 642 GP Series Installation, Operating, & Maintenance Instructions page 100

10. Remove or replace interface board.
11. Remove or replace master board.
12. Remove or replace motor driver
board
13. Insert all boards in reverse order as
they disassembled at correct
positions (see steps 12 to 7).
14. Reassemble all parts in reverse
order (see steps 6...3).
15. Tighten panel screws with 1.1 Nm
(see step 3).
100/113
MAINTENANCE
Description
Edition 2017-11-24
Series 642
Required tool
605593EC