Neopost IJ-50 User Manual page 86

Default Stamp Value
From the SETUP screen select DEFAULT STAMP VALUE and
press to confirm, the following screen will be observed:
ESC
To return to the SETUP menu with the original value unchanged,
press .
To change the DEFAULT STAMP VALUE, enter the new value
with no point or comma (e.g. 0.35 corresponds to 35 pence), then
press to confirm.
To return to the Supervisor screen press
Telephone Settings
The telephone number of the Neopost Credifon credit re-setting
centre is stored in your franking machine. This is used when you
want to purchase credit.
Modification of the telephone number is permitted only by the
supervisor. Such a setting may be necessary in case of modification
of your telephone network (for example a new prefix for an external
line), or if you are advised that the Neopost Credifon Centre number
has changed.
DEFAULT S TAMP V ALUE
0.00
OK
twice.
Supervisor settings 85