Neopost IJ-50 User Manual page 3

INSTALLATION
The mains plug on this equipment is intended to serve as the device
for isolation of the mains supply. The equipment should be installed
in close proximity to easily accessible power supply and telephone
sockets. In the UK this plug is fitted with a 5A fuse, only replace with
a fuse of the same rating.
WARNING: FOR SAFETY THIS EQUIPMENT MUST BE
EARTHED
The IJ-40/50 Franking Machines have been designed to meet
the safety requirements of IEC EN60950. The peripheral inter-
faces meet the SELV requirements of that standard, therefore in
order to maintain the level of safety provided by the IJ-40/50, the
interface of any equipment connected to the IJ-40/50 interfaces
must also meet the SELV requirements of IEC EN 60950.
No part of this document may be reproduced or transmitted in any
form or by means, electronic or mechanical, for any purpose without
the express written permission of Neopost Limited.
2
Copyright© Neopost 2004