Wiring; Interface Connections (Rear Of Unit) - Suzuki SMD12 Installation Manual

2.

WIRING

2.1

Interface Connections (Rear of Unit)

Composite 1 Composite 1
Composite 1
Network Network
NMEA2000 NMEA2000
Composite 2
Video In 1 Video In 1
Video In 2 Video In 2
Rear of SMD12/SMD16 Rear of SMD12/SMD16
Composite 2 Composite 2
MULTI cable MULTI cable
Video out Video out
USB 2.0 USB 2.0
EMI Core* EMI Core*
TO: 12/24 VDC
Transducer cable*
*
TO: Transducer
*
3
* : Use of the extension cable (C332 10M) may cause
the following problems:
- Reduced detection ability
- Wrong ACCU-FISH™ information (fish length
smaller than actual length, fewer fish detections,
error in individual fish detection).
- Wrong speed data
- No TD-ID recognition
Ground wire
(Local supply,
1
IV-8sq.)*
2 2
TO: Ship's ground
Power cable
MJ-A3SPF0019-035C
cable (Supplied, 3.5 m)
3
1
: Lay the ground wire
away from this unit's
power cable.
2 : Install the EMI core as
close to the SMD side
of the lead end as
possible.
2-1