Rear Panel Components - Fujitsu 270Dx User Manual

REAR PANEL COMPONENTS

RJ-11 Jack
This is the jack for attaching a telephone line to
the internal modem. This jack can be used with
the connector cover closed and the sliding
panel in the connector cover slightly opened
for added convenience. (Figure 1-9.)
RJ-11 Jack
Docking Port
Serial Port
Parallel Port
Slide Panel
Connector Cover
Infrared Port
Figure 1-9 LifeBook 200 Series Rear Panel
S e t t i n g U p Y o u r L i f e B o o k 2 0 0 S e r i e s
C A U T I O N
The internal modem is not intended for
use with Digital PBX systems. Do not
connect the internal modem to a digital
PBX as it may cause serious damage to
the internal modem or your entire note-
book. Consult your PBX manufacturer's
documentation for details. Some hotels
have Digital PBX systems. Be sure to find
out BEFORE you connect your modem.
External
Monitor Port
L i f e B o o k 2 0 0 S e r i e s f r o m F u j i t s u
Docking Port
This port is for connection to an optional port
replicator or docking station. The connector
cover must be closed and the sliding panel fully
opened to reveal the docking port and the
RJ-11 jack when connecting a port replicator
or a docking station. (Figure 1-9.)
C A U T I O N
The cover – which closes over the ports
on the rear of the notebook – can be
damaged if it is left open when the
notebook is moved around.
Serial Port
The serial port allows you to connect serial
RS-232C devices, such as serial printers or
serial scanners. (This is also sometimes
referred to as a COM p ort.) (Figure 1-9.)
9