Fujitsu 270Dx User Manual page 165

S e c t i o n F i v e
Problem
The Built-in Display does not close.
The Built-in Display has bright or dark spots.
The application display uses only a p ortion
of your screen and is surrounded by a dark band.
156
Possible Cause
3. The power management timeouts may be set
for very short intervals and you failed to notice
the display come on and go off again.
1. A foreign object, such as a paper clip, is stuck
between the display and the keyboard.
1. If the spots are very tiny and few in number,
this is normal for a large LCD display.
2. If the spots are numerous or large enough to
interfere with your operation needs.
1. You are running an application that does not
support 800 x 600 pixel resolution display
and display compression is enabled.
Possible Solution
3. Press any key or move the pointer,
if this doesn't work press the
Suspend/Resume button.
1. Remove all foreign objects from
the keyboard.
1. This is normal; do nothing.
2. Display is faulty; contact your
support representative.
1. Display compression gives a clearer but
smaller display for applications that do not
support 800 x 600 pixel resolution. You can
fill the screen but have less resolution by
changing your display compression setting,
(See Video Features Submenu of the
Advanced Menu on pages 75-76.)