Fujitsu 270Dx User Manual page 133

To install a PC Card:
1. See your PC Card manual for instructions on
installation of that specific card.
2. Make sure that there is not already a PC Card
in the slot. If there is, eject it, as described in
Removing PC Cards.
C A U T I O N
Some PC Cards can only be installed or
removed with the power in Suspend
mode, some only with power Off.
Please check the card documentation
for correct usage.
3. Insert the PC Card in the card slot, with the
product name label facing up. (Figure 4-10.)
4. When the PC Card is fully inserted, the eject
button will pop out.
5.Flip this button toward the front of your
notebook to fold it out of the way.
U s e r I n s t a l l a b l e
6. When the card is installed,lock it in place
by sliding the Lock button toward the front
of your notebook. (Figure 4-10.)
C A U T I O N
Installing or removing a card while your
notebook is in the process of going
through the power on or power off
sequence may damage the card and/or
your notebook.
Removing PC Cards
If you wish to remove or replace the PC Card,
use the following procedure:
1. Shutdown operation of the card.
2. Click on the PC Card indicator on the
Windows taskbar.
From the PC Card Properties Window:
3. Select the card to be removed and click
on the Stop button.
L i f e B o o k 2 0 0 S e r i e s f r o m F u j i t s u
F e a t u r e s
C A U T I O N
Windows 95 has a shutdown procedure
for PC Cards that must be followed
before beginning to remove a card.
4. Verify that the You can safely remove
your card message appears.
5. If the device cannot be removed
message appears,save all files, close all
applications,and exit Windows 95 then shut-
off the power with the power switch.
(See Power Off on pages 24-25.)
C A U T I O N
If the PC Card has an external connector
and cable, do not pull on this cable when
removing the card.
123