Rear Panel Components - Fujitsu Lifebook T4010 User Manual

DC
Power
Jack
USB 2.0 Port
Modem (RJ-11) Port

REAR PANEL COMPONENTS

DC Power Jack
The DC power jack allows you to plug in the AC adapter
or the optional Auto/Airline adapter to power your
Tablet PC and charge the internal Lithium ion Battery.
Modem (RJ-11) Telephone Port
The Modem (RJ-11) telephone port is for attaching
a telephone line to the internal multinational 56K
modem.
The internal multinational modem is not
intended for use with Digital PBX systems.
Do not connect the internal modem to a
Digital PBX as it may cause serious damage
to the internal modem or your entire
LifeBook T Series Tablet PC. Consult your
PBX manufacturer's documentation for
details. Some hotels have Digital PBX
systems. Be sure to find out BEFORE you
connect your modem.
The internal modem is designed to the
ITU-T V.90 standard. Its maximum speed
of 53000 bps is the highest allowed by
FCC, and its actual connection rate
depends on the line conditions. The
maximum speed is 33600 bps at upload.
USB 2.0 Ports
The two USB 2.0 ports allow you to connect Universal
Serial Bus devices. See "Universal Serial Bus Ports" on
page 55.
Infrared Port
LAN (RJ-45) Port
External
Monitor Port
Figure 2-7. LifeBook T Series Tablet PC rear panel
G e t t i n g t o K n o w Y o u r T a b l e t P C
Infrared Port
The fast IrDA compatible port allows you to communi-
cate with another IrDA-compatible infrared device
without a cable. (See "Infrared Port" on page 55.)
LAN (RJ-45) Port
The internal LAN (RJ-45) port is used for an internal
GigaLAN Ethernet (10/100/1000 Base-T/TX) connec-
tion. See "Internal LAN (RJ-45) jack" on page 55.
External Monitor Port
The external monitor port allows you to connect an
external VGA or SVGA CRT monitor. Note that when
the optional Port Replicator is attached to the system,
you must use the external monitor port on the Port
Replicator rather than the port on the system. See
"External Monitor Port" on page 56.
15