Fujitsu 270Dx User Manual page 71

Table 3-2 Fields, Options and Defaults for the Primary Master/Slave, Secondary Master Submenus
Menu Field Options
Maximum Capacity: Display only.
Multi-Sector Transfers: Disabled; 2; 4; 8;16.
MAX 32;MAX 64;MAX 128.
LBA Mode Control: Enabled; Disabled.
Transfer Mode: S t a n d a rd , Fast PIO 1; Fast PIO 2; —
Fast PIO 3; Fast PIO 4;
Fast PIO 3 / DMA;
Fast PIO 4 / DMA.
Ultra DMA Mode: Disabled; Mode 0;
Mode 1; Mode 2.
C o n f i g u r i n g Y o u r L i f e B o o k 2 0 0 S e r i e s
Default
—
—
—
—
L i f e B o o k 2 0 0 S e r i e s f r o m F u j i t s u
Description
Displays the maximum capacity of the drive calculated from the
parameters of the hard disk when Auto is selected and the type
is identified as hard disk, or User is selected.
This option cannot be changed when Auto is selected.Specify the
number of sectors per block for multiple sector transfer. MAX
refers to the size the disk returns when required.
Enables or disables logical Block Addressing in place of Cylinder,
Head, Sector addressing. This option cannot be changed when
Auto is selected.
Selects the method for moving data to/from the drive. Autotype
the drive to select the optimum transfer mode. This option
cannot be changed when Auto is selected. Multi-word DMA
is automatically set to mode 1 for Fast PIO 1, Fast PIO 2,
Fast PIO 3, and set to mode 2 for Fast PIO 4 / DMA.
Selects the method for moving data to/from the drive. Autotype
the drive to select the optimum transfer mode. This option
cannot be changed when Auto is selected.
61