Fujitsu 270Dx User Manual page 81

Table 3-5 Fields, Options and Defaults for the I/O Device Configuration Submenu of the Advanced Menu
Menu Field Options
Interrupt: IRQ 3; IRQ 4;
IRQ 10; IRQ 11.
Base I/O address: 100; 108;110; 118.
DMA channel: DMA 1;DMA 3.
Parallel port: Disabled;Enabled; Auto.
Mode: Output Only;
Bi-directional; ECP.
C o n f i g u r i n g Y o u r L i f e B o o k 2 0 0 S e r i e s
Default
[IRQ 3]
[118]
[DMA 3]
[Enabled]
[Bi-directiona1]
L i f e B o o k 2 0 0 S e r i e s f r o m F u j i t s u
Description
Allows user to set the serial port interrupt when port B
is Enabled.
When the mode for serial port B is set to FIR,this option is
available allowing the user to set the base I/O address for the
FIR of serial port B.
When the mode for serial port B is set to FIR,this option is
available allowing the user to set the DMA channel for the
FIR of serial port B.
Configures the parallel port using either no configuration
(Disabled),a user defined configuration (Enabled), or by
allowing the BIOS or OS to choose the configuration (Auto).
When the parallel port is enabled this option is available allowing
the user to set the mode for the parallel port. Bi-directional allows
two-way transfer of information between your notebook and a
connected parallel device.Output Only (Half Duplex) allows
information to be transferred in only one direction, from your
notebook to the printer or similar device.ECP Mode allows
communication with the ECP class of parallel I/O devices.
71