Power Sources - Fujitsu 270Dx User Manual

Multi-function Bay 2 Release Button
This is the release to allow removal and instal-
lation of devices in Multi-function Bay 2.
(Figure 1-10.)
Multi-function Bay 2
This compartment is accessed from the front of
your notebook. (See Figure 1-6 on page 5.)

POWER SOURCES

Your notebook has four possible power sources:
the primary Lithium ion battery; an optional
dual Lithium ion battery configuration; the AC
adapter; or an optional auto/airline adapter.
Connecting the Power Adapters
The AC adapter or an optional auto/airline
adapter provides power for operating your
notebook and charging the batteries.
(Figure 1-11.)
S e t t i n g U p Y o u r L i f e B o o k 2 0 0 S e r i e s
Figure 1-11 Connecting the AC Adapter
To Connect the AC Adapter
1. Plug the DC Output cable of the AC
adapter into the DC Power jack on the
right side panel of your notebook.
2. Plug the AC adapter into an AC
electrical outlet.
To Connect the Optional Auto/airline Adapter
1. Plug the DC Output cable into the DC
Power jack on the right side panel of
your notebook.
L i f e B o o k 2 0 0 S e r i e s f r o m F u j i t s u
2. Plug the auto/airline adapter plug into the
cigarette lighter of a car or other vehicle
with the ignition key in the On or the
Accessories position or into the DC
Power jack on an airplane seat.
To Switch From AC Adapter Power
To Battery Power
1. Be sure that you have at least one charged
battery installed.
2. Remove the AC or auto/airline adapter.
11