Fujitsu 270Dx User Manual page 142

S e c t i o n F o u r
Figure 4-16 Installing a LANdock
132
7. Arrange the notebook/leveler combination
to align the docking connector on the
docking device body with the Docking port
on your notebook and the notches on the
leveler with the notches on the docking
device body.
8. Push together firmly.
9. Lock in place by pulling the Docking
Release lever forward.
10. Verify that docking is complete by checking
that the LifeBook Docked LED is illuminated.
(See Figures 4-14 and 4-17.)
11. Return your notebook to operation using the
Suspend/Resume button or power switch,as
appropriate. (When setting up for the first
time you must use the p ower switch.)
Connecting Devices to the
LANdock or Port Replicator
Connect devices to your LANdock or Port
Replicator in exactly the same way you would
your notebook.Figure 4-15 shows the location of
LANdock ports and jacks.Figure 4-18 shows the
location of the Port Replicator ports and jacks.
Remember that on the LANdock and the Port
Replicator there are separate ports for mouse
and keyboard. You must use the correct one.