Fujitsu 270Dx User Manual page 181

A p p e n d i c e s
notebook.SDRAM Modules are recommended
but EDO RAM Modules will work.
Fujitsu product numbers:
16MB SDRAM,FPCEM05.
32MB SDRAM,FPCEM06.
64MB SDRAM,FPCEM07.
In s t a lling an EDO RAM Module wi ll cause yo u r
en ti re sys tem to opera te at slower EDO ti m i n g.
8MB EDO RAM,FPCEM01A.
16MB EDO RAM,FPCEM02A.
32MB EDO RAM,FPCEM03.
64MB EDO RAM, Third Party Only.
BIOS Memory
512KB Flash ROM.
256 Bytes CMOS-RAM with back-up battery.
Video RAM
2MB EDO RAM.
Mass Storage
Multi-function Device Bays
Two.
174
Floppy Disk Drive
One modular 3.5" floppy disk drive which
accommodates a 1.44MB or a 720KB floppy
disk, Fujitsu Model FPCFDD03.
One optional external floppy disk drive, Fujitsu
Model FPCFD02.
Hard Drive
One factory installed 3.2GB, 2.5" (12.7 mm)
fixed hard drive unit.
One optional modular 3.2GB, 2.5" (12.7 mm)
hard drive unit, Fujitsu Model FPCHDD03.
CD-ROM Drive
One modular, factory installed,20-speed
maximum,2.5" (12.7 mm) drive, Fujitsu
Model FPCCD06. Simultaneous with
floppy disk drive.
P O I N T
Iomega Zip Disks must be
purchased separately.
Iomega Zip Drive
One modular 100MB, 2.5" (15mm)
Zip removable media drive unit.
Audio
SoundBlaster-compatible 16-bit stereo
PCM/FM sound chip.
Spatializer 3D-Stereo multiple speaker
effect support.
Stereo headphone jack, 1 Vrms, or less,
minimum impedance 32 Ohms.
Stereo line in jack, 880 mVrms or less,
minimum impedance 10K Ohms.
Mono microphone jack,125 mVp-p or less,
minimum impedance 10K Ohms.
Two built-in speakers,28 mm diameter
(Stereo).
One built-in monaural microphone.
Communication
Internal 56K fax/data/voice modem,
upgradeable to v.90 (56 Kbps data/
voice transmission;14.4 Kbps fax
transmission, DSVD).
One IrDA compatible infrared port (4 Mbps).