Fujitsu 270Dx User Manual page 51

system is in Suspend mode by looking at the
Power indicator. (See pages 19-20.) If it is visible
and not flashing, your notebook is fully opera-
tional. If it is visible and flashing , your note-
book is in Suspend mode. If it is not visible,
the power is Off, the power is in the Windows
95 pseudo-off state, or your notebook is in
Save-to-Disk mode. (See pages 44-45.) When
you receive your LifeBook 200 Series it will be
set to the default, which is Suspend mode.
C A U T I O N
Be sure you know which settings are
active for the Suspend/Resume button
before you use it; misuse can result in
data loss. (See the Power Savings Menu
of the BIOS setup utility, pages 81-87,
for more information.)
U s i n g Y o u r L i f e B o o k 2 0 0 S e r i e s
P O I N T
Disabling the Suspend/Resume button
prevents it from being used to put your
notebook in Suspend or Save-to-Disk
mode. The resume function of the button
cannot be disabled. (See the Power
Savings Menu of the BIOS setup utility,
pages 81-87, for more information.)
P O I N T
If your notebook is active when you
enter the Suspend or Save-to-Disk mode,
changes to open files are not lost. The
files are left open and memory is kept
active during Suspend mode or the
memory is transferred to the internal
hard drive during Save-to-Disk mode.
L i f e B o o k 2 0 0 S e r i e s f r o m F u j i t s u
C A U T I O N
The Suspend or Save-to-Disk mode
should not be used with certain PC Cards.
Check your PC Card documentation for
more information.
C A U T I O N
If you are running your notebook on
battery power, be aware that the battery
continues to discharge while your note-
book is in suspend mode, though not as
fast as when fully operational. With a
fully charged internal Lithium ion battery
the suspend mode will maintain your
status for 24 hours or more.
PowerPanel
PowerPanel by Phoenix Technologies provides
Windows 95 desktop access to a comprehensive
combination of power management settings
without entering the BIOS setup utility.
41