Rear Panel Components - Fujitsu LifeBook N series User Manual

Rear Panel Components

The following is a brief description of your
LifeBook notebook's back panel components.
(Figure 2-6)
LAN Jack (RJ-45)
The LAN jack is designed to accept a Local Area
Network (LAN) RJ-45 plug.
3 x USB Ports
The four USB 2.0 ports allow you to connect
Universal Serial Bus devices.
USB Port
The four USB 2.0 ports allow you to connect
Universal Serial Bus devices.
Anti-theft Lock Slot
The anti-theft lock slot allows you to attach an
optional physical lock-down device.
Modem (RJ-11) Telephone Jack
The Modem (RJ-11) telephone jack is for
attaching a telephone line to the internal modem.
The internal modem is not intended for use
with Digital PBX systems. Do not connect the
internal modem to a Digital PBX as it may
G e t t i n g t o K n o w Yo u r C o m p u t e r
Figure 2-6. LifeBook notebook rear panel
cause serious damage to the internal modem
or your entire LifeBook notebook. Consult
your PBX manufacturer's documentation for
details. Some hotels have Digital PBX
systems. Be sure to find out BEFORE you
connect the modem.
HDMI Connector
HDMI (High-Definition Multimedia Interface) is
the interface that used to transmit higher
resolution video signal to audiovisual equipment
such as high-definition television.
External Monitor Port
The external monitor port allows you to connect
an external monitor.
Air Vents
The air vents are used to cool the system to
prevent overheating.
Do not obstruct the air vents while the system
is running; doing so could cause your system
to overheat.
S-Video Out Port
The S-Video output is used to transmit a higher
resolution video signal to a compatible TV or
VCR.
LAN Jack (RJ-45)
3 x USB Ports
USB Port
Anti-Theft Lock Slot
Modem Port (RJ-11)
HDMI Connector
External Monitor Port
Air Vents
S-Video Out Port
11