PowerXL DM1 and DM1 Pro series VFD
Mounting instruction for option cards
Step 1.
For enclosed type:
Remove the front cover (1) from NEMA 1 kit then remove the termi-
nal cover (2) from drive.
For open type:
Only remove the terminal cover.
Enclosed type
Open type
Step 2.
Remove the option card port label and four snap covers from the
drive.
Step 3.
Connect the cable to option card connector (3) and MCU board
connector (4).
2
1
Step 4.
Clamp the cable with the optional card port. Mount the option card
to the drive by inserting the four snaps into the slots on drive.
Instruction Leaflet
Effective December 2021
4
3
EATON www.eaton.com
PUB53675
11