Table of Contents
Advertisement
1.2.
Checking the compatibility of vehicle and accessories
Brand
Compatible vehicles
C-Max since model year 2018
Ecosport since model year 2017
Fiesta since model year 2018 since 07/2017
Focus since model year 2017
Galaxy since model year 2016
Kuga since model year 2018
Mondeo since about 2017
Mustang since model year 2017
Ford
Puma
Ranger since model year 2017
S-Max since model year 2016
Tourneo Connect
Tourneo Custom
Transit since model year 2017
Transit Custom since facelift 2018
and other vehicles with
Limitations
Video only
Factory rear-view camera
After market front camera
Guidelines and PDC
Version 26.01.2022
Compatibility
The interface inserts ONLY video signals into the infotainment.
For inserting Audio signals either the possibly existing factory audio-
AUX-input or a FM-modulator can be used.
In case that 2 AV sources shall be connected, a desired audio switching
will require additional electronic.
Automatically switching-back from inserted video to factory rear-view
camera is only possible while the reverse gear is engaged. To delay the
switch-back an additional electronic part is required.
The front camera will automatically be switched for 10 seconds after
disengaging the reverse gear. A manually front camera switching is
possible by external keypad.
Displayed guidelines and PDC are not available in all vehicles.
HW: CAM(100)/(V20/Y+V41)
Infotainment systems
Sync3 full version with APIM and
with 7inch or 8inch tablet or non-
table monitor – Plug & Play
installation
Sync3 Light (R5) version with
6.5inch, 7inch or 8inch tablet
monitor – Non Plug & Play
installation. For Plug & Play the
RL4-SY3-R5 is available)
Sync Connected Radio with
4inch monitor – Non Plug & Play
installation. For Plug & Play the
RL4-SY3-R5 is available)
CI-RL4-SY3
Advertisement
Table of Contents
