Power Supply Output - NavLinkz r.LiNK CI-RL4-SY3 Manual

Compatible with ford vehicles with sync3 full version with apim 7inch or 8inch, tablet or non-tablet monitor.

Table of Contents

2.7.

Power supply output

The red power supply output

external source and has a different assignment depending on the position of dip switch 1 (of

the black 8 dips):

Dip

Function

Dip 1 ON

+12V (max. 3A) when reverse gear is engaged incl. 10 seconds

delay after reverse gear is disengaged and

+12V by manual switching to front camera by keypad (short

press)

Dip 1 OFF

+12V (max. 3A) ACC

Version 26.01.2022

ACC/front cam out 12V (max 3A)

HW: CAM(100)/(V20/Y+V41)

can be used to power an

CI-RL4-SY3

Table of Contents