Picture Settings - NavLinkz r.LiNK CI-RL4-SY3 Manual

Compatible with ford vehicles with sync3 full version with apim 7inch or 8inch, tablet or non-tablet monitor.

Table of Contents

3.5.

Picture settings

The picture settings are adjusted by the 3 buttons on the video-interface. Press the

button to open the OSD settings menu. To switch to the next menu item, pressing

and

DOWN

will change the selected value. The buttons are embedded in the housing to avoid

accidental changes during or after installation. The picture settings have to be done

separately for AV1, AV2 and CAM while the corresponding input is selected and visible on

the monitor.

Note: The OSD menu is only shown when a working video source is connected to the

selected video-input of the interface.

The following settings are available

Contrast

Brightness

Saturation

Position H (horizontal)

Position V (vertical)

Version 26.01.2022

HW: CAM(100)/(V20/Y+V41)

CI-RL4-SY3

Table of Contents