Interface Operation; By Keypad - NavLinkz r.LiNK CI-RL4-SY3 Manual

4. Interface operation

4.1. By Call-Off button
Switching the video sources can be done by a long press of the vehicle's Call-Off button
Each press (approx. 2-3sec) will switch to the next enabled input. If all inputs are enabled the
order is:
Factory video
Disabled inputs will be skipped.
Switchover by vehicle buttons isn't possible in all vehicles. In some vehicles the external
keypad has to be used.
4.2.

By keypad

Alternatively or additionally to the factory infotainment buttons, the interface's external
keypad can be used to switch the enabled inputs.
 Long press of keypad (2-3 seconds)
By long pressing the external keypad (2-3 seconds), the video interfaces witches the input
from the factory video to the inserted video sources.
Note: The interface switches after releasing the switch (after long pressure).
 Short press of keypad (only if DIP 1 is set to ON)
By short pressing the external keypad, the video interfaces witches from the factory video to
the front camera input and back to factory video.
Version 26.01.2022
 
video IN1 video IN2
HW: CAM(100)/(V20/Y+V41)
 
factory video ...
CI-RL4-SY3