Connection Picture Signal Cable - NavLinkz r.LiNK CI-RL4-SY3 Manual

2.3.1. Connection picture signal cable

Connect the female picture signal cable's
the male WATERBLUE
Disconnect the CURRY
rear side of the monitor and connect it to the male
of the enclosed 4pin HSD LVDS cable. Caution: The female blue coloured HSD
connector of the HSD bridge must never be disconnected from the monitor's rear
side!
Connect the female
picture signal cable to the previously become free male
connector at the monitor's rear side.
Caution: The BLUE female HSD connection at the monitor HSD bridge has to remain
connected in the monitor's rear side during the hole process and
disconnected from its original place.
The picture signal cable has to be connected to the monitor.
may cause damage to the system!
Version 26.01.2022
WATERBLUE
coloured HSD+2 connector of the video interface.
coloured female 4pin HSD connector of the HSD bridge at the
WATERBLUE coloured HSD connector of the enclosed 4pin HSD
HW: CAM(100)/(V20/Y+V41)
coloured HSD+2 connector to
PURPLE coloured HSD connector
CURRY coloured HSD
must never be
Connection to the head unit
CI-RL4-SY3