Table Of Contents - NavLinkz r.LiNK CI-RL4-SY3 Manual

Contents
Prior to installation
1.
1.1. Delivery contents
1.2. Checking the compatibility of vehicle and accessories
1.3. Connectors - video interface
1.4. Dip switch settings
1.4.1. 8 dip - black
1.4.1.1. Activating the front camera input (dip 1)
1.4.1.2. Enabling the interface's video inputs (dip 2-3)
1.4.1.3. Activation of the Interface PDC Graphic (Dip 4)
1.4.1.4. Rear-view camera setting (dip 5)
1.4.1.5. Activating the guide lines (dip6)
1.4.1.6. Monitor selection (Dip 7)
1.4.2. 4 dip - red
2. Installation
2.1. Place of installation
2.2. Connection schema
2.3. Connection - Sync3 full version as ALL-IN-ONE head-unit
2.3.1. Connection picture signal cable
2.3.2. Connection PNP Power / CAN cable
2.4. Connection - Sync3 full version with tablet monitor and separate APIM
module
2.4.1. Connection picture signal cable
2.4.2. Connection PNP Power / CAN cable
2.5. Special case: Sync 3 Light (R5) version with 6.5inch or 8inch tablet monitor
and radio module with HSD + Sync Connected Radio version with 4inch
monitor
2.6. Installation with analogue connection (without CAN bus)
2.7. Power supply output
3. Connection - video sources
3.1. Audio insertion
3.2. After market front camera
3.3. After-market rear-view camera
3.3.1. Case 1: Interface receives the reverse gear signal
3.3.2. Case 2: Interface does not receive the reverse gear signal
3.4. Connecting video-interface and keypad
3.5. Picture settings
4. Interface operation
4.1. By infotainment button
4.2. By keypad
5. Specifications
6. FAQ - Trouble Shooting-Interface functions
Version 26.01.2022 HW: CAM(100)/(V20/Y+V41) CI-RL4-SY3