Connection Picture Signal Cable - NavLinkz r.LiNK CI-RL4-SY3 Manual

2.4.1. Connection picture signal cable

Connect the female picture signal cable's
the male WATERBLUE
Disconnect the CURRY
the rear side of the monitor and connect it to the male
connector of the enclosed 4pin HSD LVDS cable.
Connect the female
picture signal cable to the previously become free male
connector at the monitor's rear side.
Caution: The picture signal cable has to be connected to the monitor.
head unit may cause damage to the system!
.
Version 26.01.2022
WATERBLUE
coloured HSD+2 connector of the video interface.
coloured female 4pin HSD connector of the factory harness at
WATERBLUE coloured HSD connector of the enclosed 4pin HSD
HW: CAM(100)/(V20/Y+V41)
coloured HSD+2 connector to
PURPLE coloured HSD
CURRY coloured HSD
Connection to the
CI-RL4-SY3