Table of Contents
Advertisement
The AMI UEFI BIOS provides users with a built-in setup program to modify basic
system configuration. All configured parameters are stored in a 16MB flash chip to
save the setup information whenever the power is turned off. This chapter provides
users with detailed description about how to set up basic system configuration through
the AMI BIOS setup utility.
3.1
Starting
To enter the setup screens, follow the steps below:
1.
Turn on the computer and press the <Del> key immediately.
2.
After you press the <Del> key, the main BIOS setup menu displays. You can access the
other setup screens from the main BIOS setup menu, such as the Advanced and Chipset
menus.
Note:
If your computer cannot boot after making and saving system changes with
Setup, you can restore BIOS optimal defaults by setting JP1 (see section
1.6.2).
It is strongly recommended that you should avoid changing the chipset 's defaults.
Both AMI and your system manufacturer have carefully set up these defaults that
provide the best performance and reliability.
AMI BIOS Utility
IPC962/IPC964 Series User's Manual
SECTION 3
AMI BIOS UTILITY
57
Advertisement
Table of Contents
Need help?
Do you have a question about the IPC962-512-FL Series and is the answer not in the manual?
Questions and answers