Data Port Identification; Figure 3-3. Display And Data Fields - ADTRAN TSU 100 User Manual

.

Data Port Identification

When configuring the unit, menu selections will include
options from data port submenus. Selection of data ports is
necessary because the TSU 100 uses a Slot-Port method to iden-
tify which data port the menu item is referencing. If a module
containing a PBX DSX-1 option card with an Nx/DBU plug-on
interface is installed in the option slot, it would be designated
as:
DSX-1 Passthru=1.1
Nx/DBU=1.2
The Nx56/64 port that is built into the TSU 100 is referenced as
Slot 0, Port 1. On the TSU 100e, Slot 0.1 is an Nx/DBU.
61202052L1-1

Figure 3-3. Display and Data Fields

Where slot=1 and port =1.
The DSX-1 is located in the option slot and is the first port
in that slot.
Where slot=1 and port=2.
The Nx is located in the slot and is the second port in that
slot.
TSU 100 User Manual
Chapter 3. Operation
Data Field
Display Field
3-9