Download Print this page

ADTRAN TSU LT Quick Start Manual

Adtran network device quick start guide
Hide thumbs Also See for TSU LT:

Advertisement

Quick Links

Network
N
C
ETWORK
ONNECTION
Pin
Name
1
R1 RXDATA
2
T1 RXDATA
3, 6, 7, 8
UNUSED
4
R TXDATA
5
T TXDATA
R
P
D
EAR
ANEL
ESCRIPTIONS
Network Connector
Connection to T1 circuit
Test Interface
Bantam jacks provided for monitoring and testing
Control In/Out
Connection to a VT100 terminal
V.35 Connector
High-speed DTE interface
Power Switch
Turns power to the TSU on or off
Power cord connection for a reliably grounded
115 VAC Connection
115 VAC, 60 Hz power source
Quick Start Guide, 61202060L1-13A, September 2001
TSU LT
TEST JACKS
NETWORK IN OUT MON
T1
P
INOUT
Description
Receive data from the Network - Ring
Receive data from the Network - Tip
n/a
Transmit data towards the Network - Ring
Transmit data towards the Network - Tip
Technical Support 1-888-4ADTRAN (1-888-423-8726)
For more detailed documentation, visit us online at
CONTROL
CHAIN IN CHAIN OUT
OFF
V.35 NX56/64
I
I
NSTALLATION
NFORMATION
An eight-position modular jack (labeled NETWORK) is provided to
connect to the network T1 circuit. The pinout is provided on this Quick
Start Guide. See Chapter 2, Installation, of the TSU LT User Manual for
more information.
The rear panel contains a single V.35 interface for connecting to DTE
equipment. The pinout for this interface is located in Appendix C of the
TSU LT User Manual.
When shipped from the factory, the TSU LT is uninitialized and set to
factory default conditions. At the first application of power, the unit will
automatically execute self-tests followed by an initialization sequence.
The TSU LT can be configured and controlled using the local front panel
of the unit or from ADTRAN's PC Control Program, T-WATCH. A limited
menu tree is provided on the back of this sheet. For more detailed menu
information, refer to the TSU User Manual.
Additional information can be found on the product CD which contains
the TSU LT User Manual, FAQs, Data Sheets, Applications, and White
Papers.
P/N 1202060L1
VT 100 Terminal or device running
SLIP or async PPP protocol.
ON 115VAC/60HZ
.15A
Copyright
2001 ADTRAN, All Rights Reserved
www.adtran.com

Advertisement

loading

Summary of Contents for ADTRAN TSU LT

  • Page 1 • An eight-position modular jack (labeled NETWORK) is provided to connect to the network T1 circuit. The pinout is provided on this Quick Start Guide. See Chapter 2, Installation, of the TSU LT User Manual for more information. • The rear panel contains a single V.35 interface for connecting to DTE equipment.
  • Page 2 5) SET PASSCODE 6) FACTORY RESTORE Returns all configurations to factory settings 1) NETWORK TESTS 2) RUN SELF TEST 3) PORT TESTS Technical Support 1-888-4ADTRAN (1-888-423-8726) P/N 1202060L1 1) NETWORK (NI) 2) UNIT 3) PORT Copyright 2001 ADTRAN, All Rights Reserved...